Torker tire size?

i dont think it will, the 20x2.125 tyure on it is pretty close to the
crown.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

on the 05 it should.

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

redhead said:

*on the 05 it should. *

thats what is have it its too close.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

i gest messured my DX 05 It will fit, it has 3 inchs of clearence.

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

hey thankz for that redhead atleast someone will get off their ass to
help a felow unicyclist. anyway how much clearance does the torker
betwene the k rad tyre and the the top of the crown?

also seeing you have a torker what do you use it for and what is it
capable of like i was looking at doing sy 4 foot drops at the most
extreme end of the scale so do u think it will hold up (i roll out of
drops) ?

also i read your sponsorship thread and aboutthe unispins well the way
i learnt was i just started hopping seat out and put my hands on the
saddle (left on front right on the right side of the back) if you
hop (seat in) with your right hand on the front put your left on the
back left and then just hop take ur feet off the pedals and get em
out of the wat of the wheel and turn the uni around 180 degrees and
land back on it will take some doing but you will eventually land it
good luck!

--
byza_dog
------------------------------------------------------------------------
byza_dog's Profile: http://www.unicyclist.com/profile/10323
View this thread: http://www.unicyclist.com/thread/42729

an inch and a 1/4 from the top of the tyre to the bottom of the top
crown, Yes unicaw has done 6 foot drops me iv done 4 foots and landed
like a spire in the ground( grass)
I ride street and i try to do trials, I will be bying the stick fingers
tomorow with any luck.

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

I have both a 20 and a 24 Torker DX with 20 x 3 Kenda Flame and a 24 x 3
Gazz on them. A three inch tire fits fine with about a quarter inch at
the top and about an eighth inch on the sides in both frames.

I did not change out the rims, but I definitely need to on the 20 inch.
When they LBS looked it up in the book, it said it was a Pyramid Flame,
but the tire says Kenda Flame. On this too narrow rim, it doesn't have
the flat shape it should have, but it works for my nonaggressive riding.
I'm looking at the 20 inch Sun BFR rim.

Anybody have any thoughts on this rim? I think this is the same rim
that comes with the UDC BC wheel.

If I upgrade the 24 rim, I will probably go with the Alex DX 32.

--
donna
------------------------------------------------------------------------
donna's Profile: http://www.unicyclist.com/profile/10322
View this thread: http://www.unicyclist.com/thread/42729

redhead said:

*i gest messured my DX 05 It will fit, it has 3 inchs of clearence. *

what the F? maybe without a tyre it has 3 inches!

does this look like 3 inches of clearance to you?

[image: http://www.torkerusa.com/images/05_bikes/Unistar-DX-LG.jpg]

I think not.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

byza_dog said:

*hey thankz for that redhead at least someone will get off their ass
to help a felow unicyclist. *

Pfffft?

what-ever, im done here.no more food for you _dog.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

ur so ugly

--
maxisbackintown - timmmyyy

yeah
------------------------------------------------------------------------
maxisbackintown's Profile: http://www.unicyclist.com/profile/9909
View this thread: http://www.unicyclist.com/thread/42729

yes it has 3 inches of clearence from inside of fork to other inside of
fork. so yes i guess with out a tire but that meant the 2.4 will fit
gosh

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

redhead said:

*yes it has 3 inches of clearence from inside of fork to other inside
of fork. so yes i guess with out a tire but that meant the 2.4 will
fit gosh *

yeah, its wide enough but not HIGH enough.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

how high is it???

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

jagur said:

*yeah, its wide enough but not HIGH enough. *

It's high enough, too. There were at least two threads on this when the
05s came out.

On the 24", a 3 will (barely) fit.

--
vanman2004 - ...
------------------------------------------------------------------------
vanman2004's Profile: http://www.unicyclist.com/profile/9184
View this thread: http://www.unicyclist.com/thread/42729

He knows about the 24X3".

Aparently he doesnt about the 20". The 2005 20" frame has lots of
clearence.

caw89 put a 19" rim and 2.5" luna tire on a dx frame, he said it fit but
occasionally rubbed on top. He has since gotten a yuni frame now, I
beleive.

But, a 2.5 trials will fit okay, a 2.4 should fit easy.

--
forrestunifreak - The buck stops here.

warning: the above statement is usually not intended to offend anyone.

it has been known to the state of california to cause warts, toe jam,
ring-around-the-collar, compulsive twitching, and in some severe cases,
' diaper rash.' (http://tinyurl.com/ct5lp)
it may contain logic, poltical incorrectyness, pshycological nudity, and
traces of peanuts.

Team YAMS member.....
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/42729

He knows about the 24X3".

Aparently he doesnt about the 20". The 2005 20" frame has lots of
clearence.

caw89 put a 19" rim and 2.5" luna tire on a dx frame, he said it fit but
occasionally rubbed on top. He has since gotten a yuni frame now, I
beleive.

But, a 2.5 trials will fit okay, a 2.4 should fit easy.

--
forrestunifreak - The buck stops here.

warning: the above statement is usually not intended to offend anyone.

it has been known to the state of california to cause warts, toe jam,
ring-around-the-collar, compulsive twitching, and in some severe cases,
' diaper rash.' (http://tinyurl.com/ct5lp)
it may contain logic, poltical incorrectyness, pshycological nudity, and
traces of peanuts.

Team YAMS member.....
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/42729

vanman2004 said:

*It's high enough, too. There were at least two threads on this when
the 05s came out.

On the 24", a 3 will (barely) fit. *

yeah i made one of those threads...

if a 19x2.5 trails wheel fits a 2005 20"dx then i must have an 04 dx so
what-ever

my 24 was an 05 for sure since i got a Gazz in there no prob.

--
jagur - Random Unicyclist

smoke me a kipper, i'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/42729

jagur i want to kill you because of you i didnt order the tyre today

--
redhead - South Florida's Unicycle Club
------------------------------------------------------------------------
redhead's Profile: http://www.unicyclist.com/profile/9985
View this thread: http://www.unicyclist.com/thread/42729

forrest was right, i had to buy a yuni frame for hte 20in model cause
the width was fine but the top of it hit, which really suked! but i like
hte yuni frame more anyways, its better for coasting and gliding and is
lighter, only downside is i hit my knees on it and that HURTS! So te
Torker frame is plenty wide enough, but not high enough, the 24 can I
think hold a 3in, im not sure...

--
caw89 - Cody

'Cody's Gallery' (http://gallery.unicyclist.com/Codys-Gallery)

'sixsixone' (http://sixsixone.com/)

AIM: unicaw89
------------------------------------------------------------------------
caw89's Profile: http://www.unicyclist.com/profile/8228
View this thread: http://www.unicyclist.com/thread/42729