Cycling Equipment · Public discussion

TT front wheel aerodynamics

Started by blkhotrod · · Last activity · 10 posts · 1,275 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
27 October 2006
Last activity
28 October 2006
Original author
blkhotrod
Posts
10
Discussion status
Public discussion
Total views
1,275
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. would you think a 100mm front aero wheel would be better, same, or worse than a 50 mm front in calm conditions (little or no cross winds). txs.

  2. 100mm is pretty extreme. I would suggest an 85mm. This should do the trick in calm weather. It's not bad in crosswinds either. 🙄

    blkhotrod said:

    would you think a 100mm front aero wheel would be better, same, or worse than a 50 mm front in calm conditions (little or no cross winds). txs.

  3. carbonguru said:

    100mm is pretty extreme. I would suggest an 85mm. This should do the trick in calm weather. It's not bad in crosswinds either. 🙄


    thanks carbonguru. only have the choice between a 100 and a 50 front. does someone make a 85 mm front?

  4. blkhotrod said:

    thanks carbonguru. only have the choice between a 100 and a 50 front. does someone make a 85 mm front?

    You must be looking at blackwell research wheels.

    Hed makes a 60 and a 90.

    Technically speaking a 100 would be better than a 50, but when is it perfectly calm?

  5. Are you looking at two specific front wheels? If so you might help us, if you stated the exact make of the two. 🙂
    But, I guess the 100 mm would give the best aerodynamics, again, with crosswind and all, I don't know if you should go 50 mm.

  6. Yes. Zefiro makes an 85mm wheelset. 🙄

    blkhotrod said:

    thanks carbonguru. only have the choice between a 100 and a 50 front. does someone make a 85 mm front?

  7. one thing I like about HED is that they try to calculate drag from different head-on angles.

    this is probably mostly spiel, but at least they're trying 🙂

    "It's a relatively simple matter to design an aero wheel capable of producing a low drag factor against a direct headwind. However, we understand that a true zero degree headwind is almost unknown on the road. All it takes is a 5mm lateral shift by the rider and the headwind becomes a side wind in relation to the front wheel. Designing a wheel that performs well in all wind conditions is therefore paramount. This is why all of our wheels are designed and tested using wind angles from 0 to 20 degrees. By carefully regulating the depth and shape of our wheels, we can achieve optimum wheel performance no matter what the wind conditions happen to be. When our numbers go down in the wind tunnel, you go faster out on the road."

    http://www.hedcycling.com/wheels/stinger90.php

  8. Put your bottle on your seat tube, wear an aeropak (camelbak), buy an aero helmet and don't wear gloves. The helmet alone makes more difference than the front wheel. (MIT tested this)

  9. blkhotrod said:

    thanks carbonguru. only have the choice between a 100 and a 50 front. does someone make a 85 mm front?

    Zipp 808 wheels are 82mm.

  10. Nice looking wheel too!🙄

    ToffoIsMe said:

    Zipp 808 wheels are 82mm.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.