I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?
I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?
Thanks in advance, Chris Oklahoma
I didn't trust this design when I saw it; real UST wheels use FORE technology, real tubeless spoked wheels on the BMW RxxxxG/S models have the spoke holes outside the tyre beads. Get some tubes or get some Crossmax wheels.
Kinky Cowboy*
*Batteries not included May contain traces of nuts Your milage may vary
I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?
Check the valve stem in the rim and make sure it is seated securely. If air is leaking past the first seal and getting into the middle of the rim, it will show at the spoke holes. Otherwise, I don't see how a "tubeless" spoke can leak air. . .
"Chris" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
Hello all,
I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?
It's not the spokes. Loosen the valve and clean around the stem hole. You may want to use some lube like vaseline and retighten. Using soap on the tires helps to seal also. "Chris" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
Hello all,
I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?
On Sun, 28 Nov 2004 14:10:26 GMT "Dawgwalker" <[email hidden]>
Quoted message said:
It's not the spokes. Loosen the valve and clean around the stem hole. You may want to use some lube like vaseline and retighten. Using soap on the tires helps to seal also.
Petroleum products attach butyl rubber, which I suspect these parts are made of. Vaseline is a petroleum product; don't get it on tires or valve stems (or inner tubes, either.)
Soap and water is a good lubricant for these.
- ----------------------------------------------- Jim Adney [email hidden] Madison, WI 53711 USA -----------------------------------------------
I have just bought the Mavic Crossland wheelset. I have installed Michelin Wildgripper Jet S tires. Both are UST. This is my first try at running tubeless. I followed the included instructions and got the beads set. I am loosing pressure quite quickly. I did a bubble test and found that the spokes are leaking.
So my question is....Is there a goop that you can use to seal the rim strip better to avoid having to pump up the tires every day to ride?