tuning gears advice

Dundonald said:

OK I'm almost embarrassed to ask but I have to learn somewhere. I've
done a bit of digging around on how to tune my gears properly myself.

Quoted message said:

From what I've learned the tuning nob on the rear dérailleur and the

tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

Can anyone point me to a good how to guide or offer tips up here
please?

Thanks

http://sheldonbrown.com/derailer-adjustment.html

It works.

--
Paul - [censored]

Dundonald said:

OK I'm almost embarrassed to ask but I have to learn somewhere. I've
done a bit of digging around on how to tune my gears properly myself.

Quoted message said:

From what I've learned the tuning nob on the rear dérailleur and the

tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

Can anyone point me to a good how to guide or offer tips up here
please?

AUSHTA http://www.sheldonbrown.com/derailer-adjustment.html
--
Phil Cook looking north over the park to the "Westminster Gasworks"

Quoting Dundonald <[email hidden]>:

Quoted message said:

From what I've learned the tuning nob on the rear d=E9railleur and the
tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

They both do the same thing and may be used interchangeably. However, I
recommend you put the one on the gear lever in the centre of its range and
adjust the one on the rear derailleur if possible. It tends to freeze up
from road schmutz - while you can loosen it up in the shed, when you're on
the road and have a gear adjustment problem, this approach means you get
the maximum range on the one that is most likely to be working.
--
David Damerell <[email hidden]> Distortion Field!
Today is First Monday, August.

Phil Cook said:

Dundonald said:

OK I'm almost embarrassed to ask but I have to learn somewhere. I've
done a bit of digging around on how to tune my gears properly myself.

Quoted message said:

From what I've learned the tuning nob on the rear dérailleur and the

tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

Quoted message said:

Can anyone point me to a good how to guide or offer tips up here
please?

AUSHTAhttp://www.sheldonbrown.com/derailer-adjustment.html
--
Phil Cook looking north over the park to the "Westminster Gasworks"

That's great thanks for the pointer the page looks excellent I'll have
a read.

Dundonald said:

OK I'm almost embarrassed to ask but I have to learn somewhere. I've
done a bit of digging around on how to tune my gears properly myself.

Quoted message said:

From what I've learned the tuning nob on the rear dérailleur and the

tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

Can anyone point me to a good how to guide or offer tips up here
please?

The gear lever one is handy for fine tuning as it can be used while riding
along, but make more major changes at the rear.

If re-attaching the cable, set the gear lever adjuster to the central
position and screw the rear one all the way in clockwise before attaching
the cable. This allows you to get good tension afterwards as it may not be
tight enough otherwise, even when pulling with plyers.

In any gear, if the chain is reluctant to shift to the next larger sprocket,
or if it is rubbing against the next smaller sprocket, the cable tension
probably needs to be increased, so turn one of the cable adjusters
anti-clockwise by a small amount (1/8 to 1/2 a turn). Try again and
repeat/correct as necessary. Vice versa for smaller sprockets.

Remember that the derailleur limit screw or other things may be interfering
if there are problems shifting onto the largest or smallest sprocket.

~PB
~PB

Pete Biggs said:

Dundonald said:

OK I'm almost embarrassed to ask but I have to learn somewhere. I've
done a bit of digging around on how to tune my gears properly myself.

Quoted message said:

From what I've learned the tuning nob on the rear dérailleur and the

tuning nob on the gear lever are to be used. But how best to combine
both of them to get it spot on I'm unsure.

Quoted message said:

Can anyone point me to a good how to guide or offer tips up here
please?

The gear lever one is handy for fine tuning as it can be used while riding
along, but make more major changes at the rear.

If re-attaching the cable, set the gear lever adjuster to the central
position and screw the rear one all the way in clockwise before attaching
the cable. This allows you to get good tension afterwards as it may not be
tight enough otherwise, even when pulling with plyers.

In any gear, if the chain is reluctant to shift to the next larger sprocket,
or if it is rubbing against the next smaller sprocket, the cable tension
probably needs to be increased, so turn one of the cable adjusters
anti-clockwise by a small amount (1/8 to 1/2 a turn). Try again and
repeat/correct as necessary. Vice versa for smaller sprockets.

Remember that the derailleur limit screw or other things may be interfering
if there are problems shifting onto the largest or smallest sprocket.

~PB
~PB

Thanks Pete and everyone. I got my rear gears working perfectly!