r-cormier said:maybe i could buy the caps 42mm, then grind the frame down some? would
that work? or If anyone knows of a freestyle frame that has a longneck
and 42mm bearings, tell me please
I think it would be VERY difficult to grind down the frame so it fit
well. Maybe if you had access to a milling machine and the skills to
use it, or someone to do it for you.
You could shim the bearing holders w/ a few layers of increasing length
of metal tape. I did this on my Nimbus X to get clearance for a 2.25"
Max Daddy. The bolts loosen much more easily and I'm sure the frame is
weaker this way around the bearings, since there is effectively a
smaller lip over the edge of the bearing.
--
skilewis74
Ride everywhere and never just ride anywhere. If you can ride where you
are going within a hour, do it, and if you can do a trick 50-75% of the
time do it along the way.
Parafrasing a pro skater when asked for advise to kids who wanted to
get much better and maybee turn pro one day.
------------------------------------------------------------------------
skilewis74's Profile: http://www.unicyclist.com/profile/12404
View this thread: http://www.unicyclist.com/thread/63498
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
