rec.sport.unicycling · Public discussion

Riding drills that might make learning easier

psbagumba · 2008-01-27T16:04:54+00:00

I have an idea for a couple of drills that might make learning a lot quicker. This may have been covered somewhere else, but I've never seen it. Then again, I've never read a unicycling book; I've only used the fora at unicyclist.com. I humbly await the opinions of more capable riders/teachers. If the ideas seem sound, I'll write them up cleaner and post it in the tutorial section at unicyclist.com. If anyone tries this, please let me know. First: the reasoning The biggest part of riding a unicycle, IMHO, is staying vertical. But most of the time learning is spent on trying to go forward. The most basic motion we use is forward/backward pedaling and the second most used motion is twisting to change direction. New unicyclists use exaggerated motions in these 2 areas and they don't start to feel confident until they are able to make micro-adjustments without thinking about them. When the micro-adjustments are small enough, folks on the street will see a smooth-riding expert. Second: the drills Use a support that will allow at least a few feet of forward motion. Get a feel for idling, pedaling backward and forward without going anywhere. Start with big motions then try to make the motions as small as possible. After you're comfortable with this motion (I have no idea how long this will take) then work on going forward in small steps - forward for a few inches, backward for a little less. Do this ratcheting motion until you're able to go the length of the support without stumbling. Next, while doing the same forward/backward ratcheting, twist the wheel under you. Do not try to change direction drastically, just a few degrees each way. Try not to keep the turns in sync with the pedaling. The twisting should be random. When you can go the length of your support while doing these tiny twists and the ratcheting pedal motion, you should be able to go at least a short distance without support. -- psbagumba ------------------------------------------------------------------------ psbagumba's Profile: http://www.unicyclist.com/profile/15848 View this thread: http://www.unicyclist.com/thread/67249 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com

Started by psbagumba · 27 January 2008 · Last activity 27 January 2008 · 4 posts · 187 views

← Back to rec.sport.unicycling

Thread details

What we know about this thread

Original section: rec.sport.unicycling
Published: 27 January 2008
Last activity: 27 January 2008
Original author: psbagumba
Posts: 4
Discussion status: Public discussion
Total views: 187
Views / 30 days: 6

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Original post
psbagumba
Archived post

27 January 2008, 16:04 UTC #1

I have an idea for a couple of drills that might make learning a lot
quicker. This may have been covered somewhere else, but I've never
seen it. Then again, I've never read a unicycling book; I've only used
the fora at unicyclist.com.
I humbly await the opinions of more capable riders/teachers. If the
ideas seem sound, I'll write them up cleaner and post it in the
tutorial section at unicyclist.com.
If anyone tries this, please let me know.
First: the reasoning
The biggest part of riding a unicycle, IMHO, is staying vertical. But
most of the time learning is spent on trying to go forward.
The most basic motion we use is forward/backward pedaling and the
second most used motion is twisting to change direction.
New unicyclists use exaggerated motions in these 2 areas and they don't
start to feel confident until they are able to make micro-adjustments
without thinking about them. When the micro-adjustments are small
enough, folks on the street will see a smooth-riding expert.
Second: the drills
Use a support that will allow at least a few feet of forward motion.
Get a feel for idling, pedaling backward and forward without going
anywhere. Start with big motions then try to make the motions as small
as possible.
After you're comfortable with this motion (I have no idea how long this
will take) then work on going forward in small steps - forward for a
few inches, backward for a little less. Do this ratcheting motion
until you're able to go the length of the support without stumbling.
Next, while doing the same forward/backward ratcheting, twist the wheel
under you. Do not try to change direction drastically, just a few
degrees each way. Try not to keep the turns in sync with the pedaling.
The twisting should be random.
When you can go the length of your support while doing these tiny
twists and the ratcheting pedal motion, you should be able to go at
least a short distance without support.
--
psbagumba
------------------------------------------------------------------------
psbagumba's Profile: http://www.unicyclist.com/profile/15848
View this thread: http://www.unicyclist.com/thread/67249
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Report
harper
Archived post

27 January 2008, 17:31 UTC #2

psbagumba said:
The biggest part of riding a unicycle, IMHO, is staying vertical. But
most of the time learning is spent on trying to go forward.
I think it is generally accepted that the biggest -obstacle- to
overcome when learning to ride is putting too much weight on the
pedals. This is not to say that you are wrong in saying that the
biggest part is staying vertical.
psbagumba said:
After you're comfortable with this motion (I have no idea how long this
will take) then work on going forward in small steps - forward for a
few inches, backward for a little less. Do this ratcheting motion
until you're able to go the length of the support without stumbling.
I see a problem with this, especially for beginners. Technically this
is very difficult to do. If you only move forward a few inches and back
even less you are rotating the pedals only a small amount forward for
each iteration. In your forward progress you will eventually get close
to the dead spots in the pedal positions with little or no momentum to
carry you through.
--
harper
-Greg Harper
*jc is the only main man. there can be no other.*
------------------------------------------------------------------------
harper's Profile: http://www.unicyclist.com/profile/426
View this thread: http://www.unicyclist.com/thread/67249
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Report
psbagumba
Archived post

27 January 2008, 18:02 UTC #3

harper said:

In your forward progress you will eventually get close to the dead
spots in the pedal positions with little or no momentum to carry you
through.
Good point harper.
Maybe a little hip action to get through the dead spots would be good.
Right now I'm trying to learn one-footed and I find that I'm very much
in need of learning to use my hips this way. But since I went this
long without knowing that, maybe it isn't a critical skill.
Also, twisting while taking small steps is purt-near impossible. Maybe
I should go back to the drawing board.
--
psbagumba
------------------------------------------------------------------------
psbagumba's Profile: http://www.unicyclist.com/profile/15848
View this thread: http://www.unicyclist.com/thread/67249
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Report
Borgschulze
Archived post

27 January 2008, 19:36 UTC #4

Best place to learn is a fence about hip height while sitting on the
Unicycle.
Find a fence that has two gates in it that you can ride circles around.
That way you won't have to constantly dismount and walk back.
This is how I learned, I held onto the fence with one hand and started
pedaling forward while holding onto the fence, then I could simple turn
around onto the other side of the fence once I got to the end.
It took me only a few hours to learn how to ride.
The other good method is the curb method.
Rest the wheel with cranks horizontal on a curb, rider puts foot on the
back pedal, then steps up onto the Unicycle and tries to ride as far as
possible.
I taught a kid how to ride in 20-30 minutes like this, and he could
even turn after about 40 minutes, as well as stop reasonably well.
--
Borgschulze
'deviantART'
(http://borgschulze.deviantart.com/)'Gravity'
(http://videos.observedtrials.net/Gravity.wmv) is -not- the
issue.
------------------------------------------------------------------------
Borgschulze's Profile: http://www.unicyclist.com/profile/13501
View this thread: http://www.unicyclist.com/thread/67249
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Report

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.

What we know about this thread

More from this subject

Continue through CyclingForums

Active in this thread