Fractal said:Quoted message said:
Quoted message said:Stil, the law is an [censored], and I wish we could get it changed.
There is a lot on this on www.pigswillfly.com.au/?p=1372 and
www.pigswillfly.com.au/?p=1130.
Lots of the usual talking {:-), but I did pick up the bit about
"demountable", which would explain the problem with in-hub motors,
although for a "bicycle" you might be able to argue that changing a
complete wheel is well within the "nature of the beast". Not sure of
hstorical references, but many peeps here seem to have frame, group and
multiple wheels.
In-hub motors leave me cold really as when you actually read the specs
they are rather useless. Reading one a couple of nights ago that claims it
can do 600kph.
Quoted message said:A crackdown (which seems to be due to cops
interpreting the law incorrectly) has been going on for about a year
with police in places like Wagga and other country towns getting tough
on e bikes of all sorts, unless they have a separate motor, ie not in
the hub, and you only or mostly use it uphill.
Actually, seems that the problem was people wanting to sell stuff and
saying anything they could to get the sale and the regular collection of
gullible bunnies in the headlights(*). TANSTAAFL. I wonder if all those
people who purchased e-scooters could now return them for a refund under
the "unfit for purpose" criteria.
Anyway, what we need that we currently do not have easily available, is a
kit of left crank with cog, bolt on motor, electronic throttle and
multiple battery packs (24hr turn around for longer life) and home
recharger.
Now to find something less that the 90kg 70kw electric motors used by
electric vehicle enthusiasts. {:-)
Quoted message said:Someone on the blog says there is a
diminishing return in speed with bigger engines and heavier batteries so
there is point about 300 W which is probably about optimum.
The funniest post was that guy banging on about how wonderful and magical
LiPoly batteries are. Absolute scream.
Batteries can be summarised as follows;
Lead acid = lots of weight, 50% dead weight, but massive life cycles
NiCd = less weight, expensive, max two years life so live life to the max
in that time.
NiMH = less weight, more expensive, max two yrs, yadada, yadda,
LiFe = lot less weight, very expensive, liable to explode unless clamped
when recharging, only a promised longer life.
LiPol = lot less weight, very, very expensive, liable to burst into flames
when recharged (guess you have to factor in extra weight of fire
extinguisher as well ).
The major impediment to removing battery weight is your wallet.
Batteries, power and weight are really useless points to argue. It is like
arguing the specs of computers. BP&W only make sense when you are
discussing what you do with the bicycle and the terrain you are doing it
on. To me, 200watts on a flat terrain is very adequate and if you need to
carry groceries or head against the wind, then swap to a lower cog(**).
OTOH, if you were running a load bike carrying 500kg around Sydney, 2Kw
may be reasonable.
Also, old electronic design versus modern elecronic design can be a
big factor. It would also be handy to have some intelligence in
any legislation changes, aka if I could have a 1Kw motor at 20% duty
cycle, which would solve the hill climbing torque requirements (used on
trike =/= balance problem).
* I am not oppossed to e-scooter. Anything that gets motor vehicles off
the road and changes current motor vehicle usage is great in my opinion,
even bringing back Dobbin.
** bicycles = you exercise, e-scooter = nother lard [censored].