"Membrane" <[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Paul Murphy said:Quoted message said:On my Dutch bike it is perfectly accessible, all you need to do is cut
it from the side, no need to get at the bit that goes through the wheel,
it will simply drop out.This wouldn't be easy using bolt cutters with my SL7 on the Twist as the
body of the lock is right beside the frame all the way up the sides except
for at the top and there it's inaccessible due to other bits around it
such
as the rack and battery. Although it could be done carefully with some
sort
of angle grinder, that would take time unless a person was reckless with
regard to damaging the frame as well - and then it wouldn't be saleable. I
found some reviews here and it appears I'm not the only one who thinks
they're a very good idea:
http://www.fisheroutdoor.co.uk/public/index.php/product/locks/otherlocks/LKSL7.htmlThat looks the same construction as the one on my bike (mine is an AXA
SL9). On my bike the sides of the lock protrude far beyond the seat
stays, thus it should be easy to cut with a bolt cutter (although I've
no experience or knowledge of the actual practicality of such).
Yes the SL9 is just the same as the SL7 but with electronic tagging (as in a
chip which can be scanned with a device for IDing purposes rather than
location finding through GPS). Your findings tell me the correct frame lock
must be chosen to match the frame shape. There are a number of different
sizes/designs available to choose from.