Pannier rack for mountain bike

Cheeky said:

All,

Have got a Giant XTC 3.5 which doesn't have braze-ons for pannier
racks.

M-parts seat post clamp with rack mount. to you, 6 quid squire.
Make sure you get the right size.

http://www.wiggle.co.uk/ProductDetail.aspx?Cat=cycle&ProdID=5300005198&N=M:Part%20Single%20Bolt%20Seat%20Post%20Clamp%20With%20Rack%20Mount

John Hearns said:

Cheeky said:

All,

Have got a Giant XTC 3.5 which doesn't have braze-ons for pannier
racks.

M-parts seat post clamp with rack mount. to you, 6 quid squire.
Make sure you get the right size.

http://www.wiggle.co.uk/ProductDetail.aspx?Cat=cycle&ProdID=5300005198&N=M:Part%20Single%20Bolt%20Seat%20Post%20Clamp%20With%20Rack%20Mount

Thanks John. From your suggestion can I assume that I'd be able to use
one of those pannier racks for suspension bikes as seen in Edinburgh
Bike? I presume they attach through the rear wheel skewer...

Cheeky said:

O
Thanks John. From your suggestion can I assume that I'd be able to use
one of those pannier racks for suspension bikes as seen in Edinburgh
Bike? I presume they attach through the rear wheel skewer...

Emmm... dunno.
I use the M-parts clamp on my road bike, as it strangely has tapped
holes for rack and mudguards near the rear axle, but not at the
seatpost.It works just great, as I attached a rack for the London
Freewheel last Friday and carried my boat-anchor Dell laptop on Friday.

Cheeky said:

but then noticed a somewhat less costly one at Edinburgh Bike
(http://preview.tinyurl.com/29ha5m). However, when I went in and asked
about them the guy in the shop said they weren't suitable for
non-suspension bikes. I'm now v. confused. Can anyone help?

Not true, I have a rigid hybrid with that rack installed fine. The frame
does need to have the mount holes for mudguards by the rear axle though.

renum said:

Cheeky said:

but then noticed a somewhat less costly one at Edinburgh Bike
(http://preview.tinyurl.com/29ha5m). However, when I went in and asked
about them the guy in the shop said they weren't suitable for
non-suspension bikes. I'm now v. confused. Can anyone help?

Not true, I have a rigid hybrid with that rack installed fine. The frame
does need to have the mount holes for mudguards by the rear axle though.

Unfortunately mine doesn't. Am now thinking that this one from Wiggle
(http://www.wiggle.co.uk/ProductDetail.aspx?Cat=cycle&ProdID=5360028558)
coupled with the seat-post clamp suggested by John might be the
answer. What do you reckon?

Cheeky said:

Quoted message said:

Quoted message said:

but then noticed a somewhat less costly one at Edinburgh Bike
(http://preview.tinyurl.com/29ha5m). However, when I went in and asked
about them the guy in the shop said they weren't suitable for
non-suspension bikes. I'm now v. confused. Can anyone help?

Not true, I have a rigid hybrid with that rack installed fine. The frame
does need to have the mount holes for mudguards by the rear axle though.

Unfortunately mine doesn't. Am now thinking that this one from Wiggle
(http://www.wiggle.co.uk/ProductDetail.aspx?Cat=cycle&ProdID=5360028558)
coupled with the seat-post clamp suggested by John might be the
answer. What do you reckon?

Not sure, going by the picture on the site, the rack looks like it needs
the mudguard screw holes for installation.
Try emailing wiggle to ask if they have a rack suitable for your frame...

renum said:

Cheeky said:

Quoted message said:

> but then noticed a somewhat less costly one at Edinburgh Bike
> (http://preview.tinyurl.com/29ha5m). However, when I went in and
> asked about them the guy in the shop said they weren't suitable for
> non-suspension bikes. I'm now v. confused. Can anyone help?
Not true, I have a rigid hybrid with that rack installed fine. The
frame does need to have the mount holes for mudguards by the rear
axle though.

Unfortunately mine doesn't. Am now thinking that this one from Wiggle
(http://www.wiggle.co.uk/ProductDetail.aspx?Cat=cycle&ProdID=5360028558)
coupled with the seat-post clamp suggested by John might be the
answer. What do you reckon?

Not sure, going by the picture on the site, the rack looks like it
needs the mudguard screw holes for installation.
Try emailing wiggle to ask if they have a rack suitable for your
frame...

Rack from wiggle is clearly using the frame mudguard/rack threaded holes for
its lower fixing.

For most bikes, one can substitute P-Clips to provide a lower mounting
position. Only problem cases would be caused by disk brake mechanisms
(usually need to space rack wider to clear) and frames made from materials
not suited to clamps (I would be thinking very carefully before fitting
clamp to a carbon frame). Those with reasonably well equiped sheds can make
suitable brackets/spacers from scrap material.

If OP is stuck, suggest going to local shop to find solution. If first bike
shop proves to be "box shifting" with no advice, go to another. May have to
pay more for the bits, but at least they would fit.

- Nigel

--
Nigel Cliffe,
Webmaster at http://www.2mm.org.uk/

On Mon, 1 Oct 2007 10:30:53 +0100, "Nigel Cliffe" <[email hidden]>

Quoted message said:

Rack from wiggle is clearly using the frame mudguard/rack threaded holes for
its lower fixing.

For most bikes, one can substitute P-Clips to provide a lower mounting
position. Only problem cases would be caused by disk brake mechanisms
(usually need to space rack wider to clear) and frames made from materials
not suited to clamps (I would be thinking very carefully before fitting
clamp to a carbon frame). Those with reasonably well equiped sheds can make
suitable brackets/spacers from scrap material.

If OP is stuck, suggest going to local shop to find solution. If first bike
shop proves to be "box shifting" with no advice, go to another. May have to
pay more for the bits, but at least they would fit.

- Nigel

Thanks all. Time for a few phone calls, I think.