6 speed uniglide freewheel

[KENLH]

Can I use 7 cogs on this freewheel? If so what are the parameters?
Thanks,

 

[daveornee]

Can I use 7 cogs on this freewheel? If so what are the parameters?
Thanks,

UG Cogs spaced 5 mm.

 

[A Muzi]

KENLH wrote:

> Can I use 7 cogs on this freewheel? If so what are the parameters?

Like an MF-6208 or MF-Z012? No. The seven speed model
MF-5000 had a longer body. The threaded section on the end
of the seven body takes two threaded cogs.


--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971

 

[KENLH]

can i then use hyperglide cogs with the wide tab ground down with the smaller spacers on the existing freewheel body?