DA 10 spd cassette spacers query (Mavic Ksyrium)* * * * * * *

[None]

So, the little Shimano booklet that comes with the DA 10 spd
11/23 states: "use the spacer to fit to a 9 speeed hub"

My questions is how do the spacers fit on BEFORE any of the
sprockets are put on...are they not needed?...meaning the
spacers that go on first, closest to the spokes...there is
a small thin one and then one a bit thicker...is this a
Mavic thing?

The wheels/grouppo came preassebled, so i dont know the
right way.

and why dont the make an 11/25?

thx

 

[Dan R H]

Don't know about the cassette question, but my DA 10 speed
(I'm running a 12x27), I needed the tiny spacer before the
sprockets on my Ksyriums.

Dan Hertlein

"none" <[email protected]> wrote in message
news:090420041930237912%[email protected]...
> So, the little Shimano booklet that comes with the DA
> 10 spd 11/23 states: "use the spacer to fit to a 9
> speeed hub"
>
> My questions is how do the spacers fit on BEFORE any of
> the sprockets are put on...are they not needed?...meaning
> the spacers that go on first, closest to the
> spokes...there is a small thin one and then one a bit
> thicker...is this a Mavic thing?
>
> The wheels/grouppo came preassebled, so i dont know the
> right way.
>
> and why dont the make an 11/25?
>
> thx

 

[Qui Si Parla Ca]

none-<< So, the little Shimano booklet that comes with the
DA 10 spd 11/23 states: "use the spacer to fit to a 9 speeed
hub" >><BR><BR>

Onto a shimano type freehub only. Use the thick one from
mavic, then the thin one from shimano, then the
cogset...onto mavic freehub bodies.

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 http://www.vecchios.com "Ruote convenzionali
costruite eccezionalmente bene"

 

[Pistof]

"none" <[email protected]> wrote in message
news:090420041930237912%[email protected]...
> So, the little Shimano booklet that comes with the DA
> 10 spd 11/23 states: "use the spacer to fit to a 9
> speeed hub"
>
> My questions is how do the spacers fit on BEFORE any of
> the sprockets are put on...are they not needed?...meaning
> the spacers that go on first, closest to the
> spokes...there is a small thin one and then one a bit
> thicker...is this a Mavic thing?
>
> The wheels/grouppo came preassebled, so i dont know the
> right way.
>
> and why dont the make an 11/25?

They do. My velo came w/one, but I had'em swap it for a 12-
27 so that I could level the huge mtns. around here. It must
be an OEM item but I bet if there's enough interest tehn
Shimano will package and sell 'em.

Dave

 

[Andrew Martin]

"Pistof" <[email protected]> wrote in message news:<[email protected]>...
> "none" <[email protected]> wrote in message
> news:090420041930237912%[email protected]...
> > So, the little Shimano booklet that comes with the DA
> > 10 spd 11/23 states: "use the spacer to fit to a 9
> > speeed hub"
> >
> > My questions is how do the spacers fit on BEFORE any of
> > the sprockets are put on...are they not
> > needed?...meaning the spacers that go on first, closest
> > to the spokes...there is a small thin one and then one a
> > bit thicker...is this a Mavic thing?
> >
> > The wheels/grouppo came preassebled, so i dont know the
> > right way.
> >
> > and why dont the make an 11/25?
>
> They do. My velo came w/one, but I had'em swap it for a
> 12-27 so that I could level the huge mtns. around here. It
> must be an OEM item but I bet if there's enough interest
> tehn Shimano will package and sell 'em.
>
> Dave

Where did you get a 11-25? I used to run 11-23 or 12-25 in
9sp DA, depending on the race - so when I heard 10sp, I just
assumed I'd get the single cassette for all conditions. Any
chance you can get ahold of one of those still?

-a

 

[Pistof]

"Andrew Martin" <[email protected]> wrote in message
news:[email protected]...
> "Pistof" <[email protected]> wrote in message
news:<[email protected]>...
> > "none" <[email protected]> wrote in message
> > news:090420041930237912%[email protected]...
> > > So, the little Shimano booklet that comes with the DA
> > > 10 spd 11/23 states: "use the spacer to fit to a 9
> > > speeed hub"
> > >
> > > My questions is how do the spacers fit on BEFORE any
> > > of the sprockets are put on...are they not
> > > needed?...meaning the spacers that go on first,
> > > closest to the spokes...there is a small thin one and
> > > then one
a
> > > bit thicker...is this a Mavic thing?
> > >
> > > The wheels/grouppo came preassebled, so i dont know
> > > the right way.
> > >
> > > and why dont the make an 11/25?
> >
> > They do. My velo came w/one, but I had'em swap it for a
> > 12-27 so that I could level the huge mtns. around here.
> > It must be an OEM item but I
bet if
> > there's enough interest tehn Shimano will package and
> > sell 'em.
> >
> > Dave
>
>
> Where did you get a 11-25? I used to run 11-23 or 12-25
> in 9sp DA, depending on the race - so when I heard
> 10sp, I just assumed I'd get the single cassette for
> all conditions. Any chance you can get ahold of one of
> those still?
>
> -a

Came on my C'dale. http://www.cannondale.com/bikes/04/cusa/model-
4RR3KD.html

Check w/your local c'dale dealers. They may have a few
sitting around. 11-25 was too wide for me.

Dave