<snip>
> Yes, but the Sigma RDS ones are a very small size and (at least on the
> one I have) have to fit through the unit -- so you can't use
> slightly-too-big ones. I's a bit more of a hunt than what you
> imagine,
>
> Peter Storey
Your LBS probably has LOTS of this size zip tie. If not, then put two small
ones together.
Yes, moving the Sigma wireless mount's a PITA. I've had to switch bars on a few
bikes. Ugh. You have to cut UNDER as well as over the "head" and work it out
CAREFULLY. If you don't take it out carefully, you'll crack the mount. Don't
ask how I know.
The next problem is the double stick tape. It comes off when you pull off the
mount. I've used inner tubes cut down for the occasion when I can't find my
supply of tape.
I haven't looked at my Sigma mounts in a while to try and figure out how to get
a rubberband mount in there. I don't know that it can be done... The thing I
came up with off the top of the head is to make a loop out of a small zip tie
and wrap the rubber band around that.
HTH,
M