v brakes and dia comp levers and cross brakes

[Panda]

I was wondering if u can tell me if i can do the following.

I was considering using some v brakes on some drop bars, using the dia compe levers that are
designed for such a purpose. i was also considering putting on those levers that fit on the
flat part of the bar - the ones used by cyclo-cross machines. would this work, or would i need
to use cantis?

thanks

panda

 

[Gary Jacobson]

I just ordered Paul 'cross levers for my wife's bike as they can be set for use with the appropriate
cable pull for either v-brakes or canti's.

Gary Jacobson Rosendale, NY

"panda" <[email protected]> wrote in message
news:[email protected]...
> I was wondering if u can tell me if i can do the following.
>
> I was considering using some v brakes on some drop bars, using the dia
compe
> levers that are designed for such a purpose. i was also considering
putting
> on those levers that fit on the flat part of the bar - the ones used by cyclo-cross machines.
> would this work, or would i need to use cantis?
>
> thanks
>
> panda

 

[Panda]

cheers, do you happen to know if the tektro levers are also adjustable?

panda

"Gary Jacobson" <[email protected]> wrote in message
news:[email protected]...
> I just ordered Paul 'cross levers for my wife's bike as they can be set
for
> use with the appropriate cable pull for either v-brakes or canti's.
>
> Gary Jacobson Rosendale, NY
>
>
> "panda" <[email protected]> wrote in message
> news:[email protected]...
> > I was wondering if u can tell me if i can do the following.
> >
> > I was considering using some v brakes on some drop bars, using the dia
> compe
> > levers that are designed for such a purpose. i was also considering
> putting
> > on those levers that fit on the flat part of the bar - the ones used by cyclo-cross machines.
> > would this work, or would i need to use cantis?
> >
> > thanks
> >
> > panda
> >
>

 

[Gary Jacobson]

Don't know the answer.

GJ

"panda" <[email protected]> wrote in message
news:[email protected]...
> cheers, do you happen to know if the tektro levers are also adjustable?
>
> panda
>
>
> "Gary Jacobson" <[email protected]> wrote in message
> news:[email protected]...
> > I just ordered Paul 'cross levers for my wife's bike as they can be set
> for
> > use with the appropriate cable pull for either v-brakes or canti's.
> >
> > Gary Jacobson Rosendale, NY
> >
> >
> > "panda" <[email protected]> wrote in message
> > news:[email protected]...
> > > I was wondering if u can tell me if i can do the following.
> > >
> > > I was considering using some v brakes on some drop bars, using the dia
> > compe
> > > levers that are designed for such a purpose. i was also considering
> > putting
> > > on those levers that fit on the flat part of the bar - the ones used
by
> > > cyclo-cross machines. would this work, or would i need to use cantis?
> > >
> > > thanks
> > >
> > > panda
> > >
> > >
> >
>