Hi -- Anyone tried a Miche 10 speed cassette on a shimano hub ? Like dope I bought 2 , 11-27' s before I tried one and it shifts terribly. When you tune the d'rlr stops and cable tension to shift up from small to large cogs it won't shift down right, and vice versa. I also can't go from 9 to 8th gear and 3ed to 2nd without double shifting. The pattern that the teeth make from cog to cog look almost random, versus the nice spiral pattern you see in the shimano cassettes. I took it apart and reassembled it twice and measured all the spacers to make sure they were the same thickness. I also noticed that each gear fits a little sloppy on the hub, some of them differently, so they move around until the cap lock is tightened. I lubed my cable, checked for kinks, hangups, etc and found nothing. I reinstalled my shimano 12-27 , 10 speed cassette back on and within minutes I had it shifting flawlessly. Bizarre. Hint anyone ? thanks !