F
Friday
Guest
I made up a bracket for my Trailtech HID light. It's a bit rough but you
can view it here.
http://www.hyperactive.oz.nf/Light5/Light5.htm
can view it here.
http://www.hyperactive.oz.nf/Light5/Light5.htm
I've used similar rail clamps for mounting pannier racks and for a map holder, so I'm sure one could be adapted for a light mount. I sourced them from a Marine supply shop in Elizabeth St, Melb for about $9 a pair.SMS said:Friday wrote:
> I made up a bracket for my Trailtech HID light. It's a bit rough but you
> can view it here.
>
> http://www.hyperactive.oz.nf/Light5/Light5.htm
I think that I'd use a rail clamp base
"http://www.driftmaster.com/Bases.html".
The Lil' Pro has a 3/8" threaded hole, while the TrailTech web site says
that the light requires a 3/8" hole, so it's not clear what the
threading of the bolt on the TrailTech is. Worst case, you bolt a small
rectangle of aluminum onto the rail clamp, which would also allow the
wire to come out through the bolt hole.
We use essential cookies to make this site work, and optional cookies to enhance your experience.