Campa 10 ergopower right side on 9 speed

Discussion in 'Cycling Equipment' started by slaskalainen, Jun 6, 2007.

  1. slaskalainen

    slaskalainen New Member

    Joined:
    May 1, 2007
    Messages:
    5
    Likes Received:
    0
    (rear gearng).
    Of course, I could install and try, but

    is it possible to use a Campa 10 ergopower right side if the rest of the bike is campa 9. (left should be no poblem)..................

    anyone who knows?
     
    Tags:


  2. John M

    John M New Member

    Joined:
    Jun 21, 2005
    Messages:
    1,404
    Likes Received:
    0
    It won't work very well because of the 9s cassette spacing. You can either get a 9s gear to convert the C10 shifter to a 9s or you can use a shiftmate. Alternatively, you could respace a 9s cassette to 10s spacing.

    If I were you, I would just get a 10 cassette/chain and upgrade. The rest of the 9s drivetrain will work fine with the 10s.
     
  3. BlkTS02

    BlkTS02 New Member

    Joined:
    Jun 5, 2007
    Messages:
    9
    Likes Received:
    0
    You can run a shimano 9 cassette with good success. Just make sure the limit screws are properly adjusted.
     
Loading...
Loading...